HOT ! Professional Grade｜ Other Products ｜150C Black Grab Bar with 38mm Bar Diameter and Concealed Fittings (Various Lengths)

MATERIALSTubing - Fabricated of type 304 stainless steel. Exposed surfaces are powder-coated matte black.
Concealed Flange - 1/2" (13mm) deep, type 304 stainless steel, 3" (76mm) in diameter furnished with 3 stainless steel set screws and one back plate. Flanges and center posts are welded to tubing.
MOUNTINGClearance is distance between finished wall surface and inner edge of tubing. Standard clearance furnished is 1-1/2" (38mm). Required  mounting height is 33" to 36" (838 to 914mm) from top of grab bar gripping surface to finish floor. 36" (914mm) horizontal grab bar should be installed on back wall and 42" (1067mm) horizontal grab bar installed on side wall or partition stall. Screws (not furnished)
SPECIFICATIONSGrab bars have been designed and tested to withstand a downward pull when properly installed that exceeds HUD, HEW, FHA, VA, and other Federal, State, and local codes, including the Americans with Disabilities Act (ADA). Dimensions are measured from center-line to center-line of tubing, unless noted on grab bar application by circle dimensions which are from center-line of tubing to wall.
Safety WarningGrab rails are no stronger than the anchors and walls to which they are attached and, therefore, must be firmly secured in order to support the loads for which they are intended. The box does not have concealed anchor devices or mounting screws, but we can supply several suitable Bobrick fixing kits.
Brand:BobrickSKU:150Cx18.MBLKTags:PricefyBar Length:455mm, 610mm, 915mm, 1065mm, 1220mmFinish:Black